PVC Hook Up Wire Facts – Polyvinyl Chloride Lead Wires

Cables and wires are primarily used to transmit electrical energy from its main source to the various users in different places. Long before wireless telecommunication was invented, wires and cables were used to transmit information from place to place and from continent to continent.  There was a cable that connected Europe and South America.  With man’s various inventions and innovations of things that had help him lighten his work and load, different types of wires with different types of materials were also invented to accommodate its various uses. 

One of these wires that are widely used nowadays is the PVC Hook Up wire.  Hook up wire is a standard conductor wire that is primarily made of copper with tin and is stranded.  Tin is basically added for easier soldering since it is primarily used in wiring a mechanism with point to point connection even if it can hamper a little the conductivity of the copper.

A PVC Hook Up wire is primarily used in the manufacturing industry especially in the appliance sector since it is used in the internal wiring of the various products that these companies are manufacturing.  This type of wire is using smaller AWG which had made this wire more flexible as compared to the other wires available in the market today.  It is also known to use lesser voltage as compared to the wires used to transmit electricity.  A PVC Hook Up wire is not a high temperature lead wire and it is only used in internal settings.  Exposing it to water, solvents and oil can cause irreparable damage to it.  Use a different type of wire if you have plan of using the material where it is installed in an outdoor setting especially if it is constantly exposed to the elements.

PVC Hook Up wire is available in different colors and in different voltages.  You can purchase these wires by meter or by spools.  There are a number of online stores that are selling these materials.  These online stores are offering free shipping to its customers if the said customer had purchase materials with amount higher than $250.  You can ask the seller to customize the color of the wire according to your specification.  You can also ask them to cut the wires at a specified length.  The thickness of the insulator also varies but you can ask for a customized thickness. 

You have to check that there is uniform thickness of the insulator to avoid accidents.  There are guidelines that the manufacturers follow in producing the wires to ensure the safety of its users.  Failure on their part to follow these guidelines will make them liable for the injury that its users will incur due to its negligence.  To ensure your safety and of the user, you need to purchase PVC hook up wires from accredited manufacturers. 

WesBell Electronics Inc
(800) 334-8400

Why Are There Different Types of 18 Gauge Lead Wire?

Different types of 18 awg lead wire are engineered each time there is a new application because there are different circumstances in each situation. The common denominator with each lead wire is the amount of electricity that can travel through a copper wire as thick as 18 awg. The differences are voltage, environmental temperature and possibly weather or moisture that could damage or puncture the insulation.

An 18 awg solid bare copper wire is the most basic because it doesn’t even have insulation at all. It’s a solid piece of copper used as a ground wire for most electrical applications.

The next step up would be the UL1007 wire and UL1015 wire which are nearly identical aside from the difference in voltage. UL 1007 has a slightly thinner insulation because it’s approved for 300 volts, which makes it cost less as well. UL 1015 is thicker with a 600 volt rating and both come with a temperature rating of 105°C.

Teflon is a high temperature wire called Type E or M16878/4 wire. It’s manufactured with a PTFE insulation and silver plated copper strands rating it as high as 200°C. It’s much more expensive than PVC wire because it has copper, silver and PTFE compound which is becoming difficult to get your hands on.

TFFN 18 awg wire is rated at 90°C in dry locations and 75°C in wet locations. It has a PVC insulation with a nylon coating and it comes less flexible than conventional PVC wire so that it’s easier to use in the electrical applications. Pushing a flexible wire through conduit would be very difficult because it would keep bunching up.

Those are just a few types of 18 awg wire available through WesBell Electronics online or over the phone. We offer free shipping on orders over $250 and offer small spool sizes so that you can limit your waste on each job. Please call if you have any questions about our products or our blog posts!

WesBell Electronics Inc
(800) 334-8400

Information and Facts on Power Cable

Power cable comes in a variety of shapes and sizes, and can look complicated to the layman. These cables can be single-conductor, multi-conductor, as well as industrial strength or for personal use. Each type of power cable has its own advantages, which make them suitable for certain types of applications.

A power cable is categorized in three classes, 1) high voltage (for applications requiring load greater than 40,000V), 2) medium voltage (for applications requiring load between 6000V and 36,000V) and 3) low voltage (for applications requiring load below 1000V). These cables are used for feeders and other heavy machinery, along with branch circuits in electrical utility, commercial and industrial applications.

Single-conductor power cable is used in various applications such as stage lighting, locomotives, DLO and for welding purposes. Each single-conductor cable, depending upon its use, has a different rating for amps, voltage, flexibility and insulation, each having a different price-level.  

There are many multi-conductor cables; extensions cords, Type G-GC, Type W, SOOW and portable cords, each encased a rubber jacket for insulation. These cables are safe and flexible and when additional flexibility is required, there is a multi-conductor cable available for this need. The SOOW multi-conductor cable is similar to the extension cord (before the plugs are attached) and is generally used to supply power generators and tools in industries.

The least-expensive power cable of this group is the welding cable. Welding cable has a rubber jacket and flexible copper fibers and is rated to 600V. DLO cable also has the rubber jacket, is rated to 2000V and has tinned copper fibers. The DLO can carry more power and therefore has a higher corresponding price.

Remember, when installing power cable, it is recommended that you consult with your electrician. And when it is time to purchase your cable, some helpful hints include knowing the operating temperature, amperage, voltage, outer diameter (cable diameter + insulation jacket). Please call WesBell at 800-334-8400 for all your cable needs.

Installing THHN cable in cold weather

When the weather is cold, you can have problems not just with your heating bills and skin, but also with your cables. For example, the THHN cable is easily vulnerable to deterioration due to cold weather.

THHN cable is Thermoplastic, High-Heat Resistance, Nylon-Coated, therefore the name- THHN. Though it is versatile cable and does not fall under any specific application category, it is mostly used under Hook-up wire class.

Strengths

THHN cable comes in a variety of strengths. And since it is made from thermoplastic material, it is easy to heat and cool this wire many times to change its shape. But there is a limit to the number of times this wire can stand heating and cooling. It has its lower and higher temperature limits and if the temperature changes cross this range, this wire can become unstable. Temperature range depends upon manufacturers.

When the THHN cable comes with ‘High Heat’ rating, it means that this wire can be used in high temperature scenarios. These wires come with various specifications, which determine the specific applications where these can be used. For example, “Nylon coated” means that a certain thermoplastic material is used in this wire.

Coming to installation of the THHN cable in the cold weather, there are some simple guidelines that you should follow. Keep this cable indoors, and not in the outdoor harsh environment. Generally, a temperature of 65°F works well.

If keeping the cable indoors is not possible, bring it inside for at least 24 hours, before you install it.

If the outside temperature is below 14°F, then do not install the THHN cable.

While installing the cable, take care that it is not dropped on the floor, as these impacts can cause cracks in the stiff cable material.

Make sure you do not bend the cable too much, because it can cause the cold and stiff cable to break.

Once you have installed it, this cable will work properly in environments with temperature higher than 14°F.

All you need to Know about High Voltage Cable

If you want to transfer large amount of electricity, then high voltage cables are your safest bet. There are various forms of these cables, and all are used for different purposes depending upon voltage of electricity and the machines for which these are used. Three types of cables are: high, medium, and low voltage cables. Out of these, high voltage cables are used when the voltage is above 1000 V. These cables are heavily insulated to prevent any risks or hazards.

• AC power cables

These cables are used to transfer up to 2000 V of electricity. The composition of these cables includes cross section of cable, polyethylene insulation, and conductive material like aluminum or copper. These cables are highly flexible and work well both in low as well as high temperatures. The cable layers are fused together to avoid air seeping in, as this can cause electrical discharge, thereby damaging the insulation.

• HVDC cables

These are specialized cables that are designed for high voltage direct currents, and thus are called HVDC cables. If you have seen a power line, then it would be easy to understand, as a power line is also an HVDC cable. These cables are helpful in carrying large loads of electricity over longer distances. After reaching the transformer, their electricity is converted to AC form. Thereon it runs with lower voltage, and is transferred to businesses and homes.

• X-ray cables

These cables are used to link other high voltage cables with X ray machines. These are also used to connect high voltage cables to other scientific equipment that require higher loads of electricity. These are highly flexible cables. They have a braided cover of copper wires, and are insulated with rubber. These are fused to high voltage cable to provide safety, and to reduce the hazards of electric shocks.

All these cables are not for home use. These are used to connect high power sources to other devices or cables. If you want to buy these cables, make sure you go for the best quality, as bad cables can lead to dangerous situations.

Using Teflon wire for High Temperatures

Wire insulated with Teflon, or Teflon wire, is very useful. If you have been using PVC hook up wire to fight insulation melt downs, then you will be pleased to use Teflon. It cannot even get affected by a soldering iron. It has been used since the 1960’s due to its excellent performance in high temperature scenarios. Some companies also use it in classification of surface electronics.

Teflon wire has got copper strands, plated with sliver. The silver plating, along with Teflon insulation helps the wire to sustain extremely high temperatures. It is much better than basic hook up wire that suffers from melt downs in high temperatures. And due to its great heat withstanding ability, Teflon wire comes expensive. But in case your needs are about wiring places with extremely high temperatures, it will be a good investment in the long run.

This wire is made by following many methods. Two of the more common methods are wrapping and extrusion. Extrusion is the most common one and is done usually in the standard sizes of 24 AWG and 22 AWG. There are also some smaller sizes, where space is an important factor. The covering comes in fused and wrapped types. Teflon is also used as the outer jacket of co-axial cables.

Teflon wires also have great resistance to moisture, flame, damage from soldering iron, and thermal aging. Apart from that, the PTFE (polytetrafluoroethylene) coating is able to resist many harsh chemicals, ozone, greases, and solvents.

You can install these wires at many places, as they are very easy to fix. It also has low degree of power loss, and thus is great for high frequency usage. Because these wires are small and slippery, they can be used almost anywhere.

PTFE or Extruded Teflon hook up wire has 3 types: Type E (most commonly used, and rated for 600 V), Type EE (having thicker Teflon jacket, and rated for 1000 V), and Type ET (having thin cover, and rated for 250 V). All 3 of them can be used for temperatures up to 200^o C

Basics of Bare Copper Wire

We all know that of all the metals used all around the planet, copper is the number one metal in terms of its usage. This is because it is the most versatile metal, and it touches the lives of people in one way or the other. It has a significant role to play in electrical engineering branch in various ways. It has great conductivity power, and thus is used a lot in making electrical wire. Although there are many other available metals as well, but none can beat the versatility of copper.

Copper wire is available in both forms- with and without insulation. It depends upon the engineers- whether they want insulation or not. Depending upon where they are using the wire, they decide if it should have insulation or not. Both insulated and bare copper wires are used in different applications. They have their use in different engineering segments.

The bare copper wire is also called ground wire, since it has no protection or insulation. This wire is generally used as the platform for various wires and cables.

This wire can come either in solid form, or in small AWG sizes, wrapped to make some specific gauge. Experts say that using small AWG sized wire allows more flexibility to the wire, and it bends easily around the corners. Although flexibility is a good thing, but not in all cases, so a solid form bare copper wire is preferred in many scenarios. For example, electrical contractors require stiff wires, so that the wire could be sent through a conduit for longer distances.

Green THHN wire is called ground wire, particularly when that wire has to be used outdoors. It is used for grounding purposes to safeguard people against hazards.

So this is where bare copper wire is used. But before you purchase this wire, you must make sure that the company you are buying it from is a good and trusted one. One simple solution is to look for this wire online. You can find many trusted online companies that can provide you the kind of bare copper wire you want.

Types of Insulation- Hook Up Wire

If you are using PVC hook up wire for electrical purposes, you should know about the insulation that you can use with this wire.

UL 1007

This wire is a form of hook up wire, which is particularly used for 300 V PVC cable that runs at about 0.016 inches of thickness of the insulation material. The popularity of the term UL grew a lot because the UL confirms that a wire can withstand the voltage and temperature that it claims to handle. Therefore, UL 1007 cable is endorsed by UL to work at 300 V, as it is mentioned on its specification sheet.

UL 1061

UL 1061 is another PVC hook up wire that is quite similar to UL 1007. It has 0.009 inches of thickness of insulation material. Like UL 1007, it also supports 300 V. It is generally used with the appliances that need an outlet with smaller diameter.

UL 1015

Yet another PVC hook up wire, the UL 1015 supports 600 V, as opposed to 300 V supported by UL 1007 and UL 1061. Since it supports higher voltage, it needs thicker insulation. The thickness of insulation material for this cable is 0.032 inches. The range of this wire is from 10 awg to 24 awg- but before the UL type could change.

Teflon

Teflon is another type of hook up wire. It supports insulation at high temperatures going up to 200 degree Celsius. Other PVC insulations work up to temperatures of 105 degree Celsius. Apart from the temperature difference, Teflon has copper plated with silver, and not tinned copper. This feature also helps it to sustain high temperatures.

These wires were some of the hook up wires that you could use while working on an electric application. Some of these cables cannot stand too much wear and tear, and so they are more suited for indoor works, while some cables are rough and tough, and so can be used outdoors as well as underground. Before you buy any type of wire, you must consult your electrician and take his opinion.

Romex Wire- The Standard Wire for Homes

Romex wire has become really famous due to its time saving quality. It runs behind your walls, and connects your appliances to their respective switches. This cable comes in a variety of sizes- depending upon the amount of power required for a particular appliance.

Romex 12/2 and Romex 14/2 are two most popular sizes for homes. Though this wire is very popular in home wiring system, it cannot be taken outside, as the moisture will eat through its cladding and insulation.

Though romex wire is meant for indoor use, sometimes you need to take a part outside as well. In such a case, it is better that you use UFB cable. It is an underground wire, which does not require conduit. This cable can easily be used outside, and underground too.

If you do not have any electrical experience, make sure you leave the electrical fixing work to the experts. There is no need to work on it if you don’t know much about electrical work. This is because this kind of work is dangerous and can pose a danger to your life. If you have decided to do it on your own, make sure you switch off the power supply and wear rubber gloves.

If you want to connect small power sources to big power sources, inside your home, then Romex 8/3 and Romex 6/3 cables can be used. But then again, there is the same problem- Romex cannot be taken outside. If you have to do outdoor electrical wiring, you should use UFB cable. The UFB cable isn’t very expensive and minor outdoor fittings can be easily done with it.

In case you want to do electrical fitting for your garage or barn, then a small UFB cable would be sufficient- you can go for UFB 6/3 or smaller if you want. But make sure you do not use Romex wire for your garage, because this wire will wear out fast and lose its insulation really soon.

These are just some standard sizes. The ideal cable size would depend upon your house and application area. It is better to talk to an electrician and determine the cable that would best suit your needs.

Learn More about the Common Electrical Wire

Electrical wiring work can be risky. If you need to do some work related to electrical wire, then you must have experience and knowledge about how electrical things work. When it comes to working with electricity, you cannot work on the trial and error procedure. Electrical mistakes are deadly and can even cause loss of life. This is why, when you work with electrical wire, you must be clear about certain things. There are a few situations to help you with your electrical problems.

First of all, let us talk about wiring a switch.

Using a home switch is very easy, but wiring may take a bit of knowledge. If you are going to wire an on-off switch, then it is a very simple task. There are three types of wires in a switch- green, white and black. Divide the black wire in 2 parts, and connect each part on terminal screw- on top and bottom. Connect the white wire with the light colored terminal and the green wire to the ground screw. Once this is done, your switch will be ready to work without any problems. In case you think that you cannot do this properly, it is better that you take help from an experienced person.

Let us now discuss how to wire a fan, specifically- a ceiling fan.

Wiring a ceiling fan is not very difficult, but if you do not have any electrical experience, it would be better if you call an expert. You may use a single switch to operate the ceiling fan for the sake of simplicity. Simply connect the black wire of the switch to the black wire of the fan. In case you want to wire a light as well, then you can connect the black wire of the switch to the blue wire, as well as the black fan wire.

Using a common electrical wire is very easy if you have the proper knowledge and tools. When you work with electricity, make sure you switch off the main power, and keep yourself insulated by wearing rubber gloves. Never work with electricity if your hands are wet.