Olflex VFD Symmetrical Drive Cable – For Large HP VFD Drives

Olflex® VFD Symmetrical Drive Cable is a large AWG VFD (variable frequency drive) cable constructed with three symmetrical grounds and longitudinal copper tape shield. A VFD is combined to motor driven systems to be able to save energy. When you connect the motor-driven system to the VFD, you are now allowed to control the speed by altering the frequency of the motor supply voltage. The construction of this VFD drive cable is 3 power + symmetrical grounds. Conductors are designed with finely stranded tinned copper with black number conductors and green or yellow ground wire. It is also constructed with a longitudinal copper tape shield.

This symmetrical drive cable has a minimum bend radius of 15 x cable diameter for flexible use. Its temperature range is from -20°C to +90°C and a nominal voltage of 600V while the conductor stranding is Class B. It passed approvals such as UL Type TC-ER, UL Standard 1277 and 44, IEEE 1202 (70,000 BTU/HR) flame test and CSA: c (UL) CIC/TC FT4

 This cable is sunlight resistant and it is also ideal for direct burial cable applications. It also conforms to CE low voltage directive. This cable is available from 1 awg through 500 MCM for 75 HP and larger VFD drives. Most versions of this cable are constructed with a foil tape and tinned copper shield with jacket insulation which could either be PVC, Elastomer Alloy or TPE. The copper tape shield is used to 100% protect against RFI and EMI interference.

Finding a good cable suited for your cable connections is a must. It should be made of high quality materials and should be highly flexible and functional. VFD cables are very durable and they are reinforced with more security. When looking for Olflex® cables, you need to check the company logo and make sure that you are buying a genuine product. When you are purchasing online, it is best to buy from a reliable online store that has been known in the industry with a good reputation.

VFD drive cable is recommended for use in large HP applications, large presses, HVAC and on/off applications using VFD drive and motor. VFD cables has black PVC jacket with XLPE insulation. This kind of cable does not come in cheap, so you have to be very careful with the brand that you are buying. It also takes time to look for cables such as this one, so knowing the right company to turn to when you need to replace your cables will you a lot of time without the hassle.

Olflex® VFD Symmetrical Drive Cable is the most suitable cable for motors, drives and assemblies. This type of cable is more flexible than corrugated armor cables and metal clad. It is 100% protected from EMI/RFI due to its copper tape shield. Standard put-ups for this cable are 100ft, 250ft and 500 ft. WesBell Electonics offers a wide range of Olflex® VFD cables. You may discuss your needs with their knowledgeable sales staff that are more than willing to assist you.

WesBell Electronics Inc
(800) 334-8400