Have you been planning to install a full fire alarm system in your home? This is a very good decision to pursue, since you will never know when a fire would start. To play it safe, your house should have this system working 24 hours a day. However, there are a lot of things that you should consider before shopping for the components of your system. You should still be wary about the quality of your fire alarm system even if you already have the best smoke detectors. Why? The reason lies on the electrical wire that you will be using.
Installing an alarm system would never be complete without your fire alarm cable. In that essence, the quality of your system depends on the electronic wiring of fire alarms. How then, can you ensure that you are using the best wirings for your alarm system? What are the things that you should consider when buying an electronic wiring for your fire alarms? This article will help you answer these questions. The following are some of the points that you should take note in choosing your wires.
- Load capacity – Smoke detectors usually require a high load of electricity when an emergency starts. Whenever smoke is detected, this device will ask for this electrical load to ring the bell. In that case, you wires should be able to handle big surges of electricity. If a wire gives into the pressure of the electrical load, the goal of the smoke detector would be compromised. Try to look for the average electrical load that your wires can handle. As this value gets higher, you will have a better chance of surviving a fire outbreak.
- Shields – In due time, wear and tear can have a lasting effect in your wires. To prevent any damages, your wires should be shielded. This is especially true if you plan to use plenum wires. Because of the limited ventilation, there is a big tendency for the wires in your plenum to overheat. However, if you have bought shielded wires, you do not have to worry anymore about this problem. In addition, the electronic wiring of fire alarms should have the proper protection when it comes to moisture. The presence of moisture will easily erode the conductor part of your wires. As an effect, this erosion will lessen the capacity of the wire to transfer electricity. Moreover, since water is a good conductor, the electricity might get into places that you would not want it to go.
- Lower Resistance – This has something to do with the electrical load of your wire. When the wire has a lower resistance, it would allow much of the electricity to flow. In that case, you can be sure that your smoke detectors will alarm you at the slightest signs of danger.
Before buying the electrical wiring of fire alarms, you should do your research on the brands available in the market. This will help you find the best brand for the smoke detectors that you have bought.
WesBell Electronics Inc