|
|||||
WesBell Electronics sells different types of Power Cable that are either armored (with an aluminum interlocked armor) or not armored. These power cables are approved for underground use or as some call it, direct burial. This is the Type MV-90 2000 Volt power cable without the AIA (Aluminum Interlocked Jacket). These power cables are approved for underground use or as some call it, direct burial. These cables have a lot of copper in them which make it difficult to price on the internet. If you need a different type of power cable we also stock Welding Cable, locomotive cable, Electrical Wire and Tray Cable. Please call for a quote if you don't see any pricing. We also offer FREE SHIPPING over $250.00. Call now (800) 334-8400!
Not sure what type of power cable you need? See our Power Cable Questions and Answers. There's also a discussion on the different types of power cable and their applications.
Products
- Electrical Wire
- THHN Wire
- Romex® - NM-B Cable
- UF-B Cable
- SER Cable - Service Entrance Cable
- Bare Copper
- Tinned Copper - Bus Bar Wire
- Hook Up Wire
- PVC 300 Volt
- PVC 600 Volt
- Teflon Wire - High Temperature Wire
- Kynar Wire Wrap
- Single Conductor Cord
- Welding Cable
- Extra Flexible Welding Cable
- DLO Cable
- Stage Lighting Cable
- Entertainment Cable
- Type W
- Power / Industrial Cables
- SJOOW Cable - 300 Volts
- SOOW Cable - 600 Volts
- SOOW Extra Flexible Yellow
- Type W
- Type G - Type G-GC
- Tray Cable
- Medium Voltage Power Cable
- Extention Cords
- Multiconductor Cables
- PVC Unshielded
- PVC Shielded
- Fire Alarm Wire
- Speaker Wire
- Milspec Cable
- Heat Shrink Tubing
- 2:1 Polyolefin Shrink Tubing
- 2:1 Polyolefin Adhesive Tubing
- Products by Manufacturer
- Alpha Wire Products
- Olflex® Control Cables
DuraSheath EPR/HYP, Medium-Voltage Power, Non-Shielded 2400V, UL Type MV-90
Product Construction:
Conductors:
- 8 Awg through 1000 MCM bare copper
- Compact Class B strand
Extruded Strand Shield (ESS):
- Thermoset semi-conducting stress control layer over conductor
Insulation:
- Ethylene Propylene Rubber (EPR) colored to contrast with black conducting shield layer
Jacket:
- Low-lead Chlorosulfonated Polyethylene )CSPE) /Elastomer blend
Applications:
- Proven record of reliable performance through extensive use in these applications: pulp and paper mills, petrochemical plants, sewage treatment facilities, water treatment plants, steel mills, textile mills, utility power generating stations, scrubbers and other environmental protections systems, railroad and mining facilities
- For use in industrial and utility applications, where ease of installation is a major concern because of limited space and exposure to personnel is minimal
- For use in wet or dry locations when installed in accordance with NEC
- For use in aerial, conduit, open tray and underground duct installations
Features:
- Rated 90°C
- Excellent heat and moisture resistance
- Flexibility for easy handling
- High dielectric strength
- Low moisture absorption
- Electrical stability under stress
- Low dielectric loss
- Chemical and sunlight resistant
- Simplification of splicing and termination by elimination of need to handle cable shield
- Extra tough, mechanically rugged compsite insulation and jacket construction
- Meets cold bend test at -35°C
on the items below.
| Part Number | # of Conductors | Awg Size | Nominal OD | Weight per 1000 feet |
| 14901.410800 | 1 | 8 | .58 | 196 |
| 14901.410600 | 1 | 6 | .62 | 241 |
| 14901.410400 | 1 | 4 | .66 | 308 |
| 14901.410200 | 1 | 2 | .72 | 408 |
| 14901.410100 | 1 | 1 | .76 | 476 |
| 14901.415100 | 1 | 1/0 | .79 | 562 |
| 14901.415200 | 1 | 2/0 | .84 | 666 |
| 14901.415300 | 1 | 3/0 | .92 | 823 |
| 14901.415400 | 1 | 4/0 | .97 | 983 |
| 14901.416000 | 1 | 250 mcm | 1.08 | 1183 |
| 14901.416200 | 1 | 350 mcm | 1.17 | 1545 |
| 14901.416500 | 1 | 500 mcm | 1.30 | 2077 |
| 14901.417000 | 1 | 750 mcm | 1.54 | 3040 |
| 14901.417500 | 1 | 1000 mcm | 1.70 | 3913 |
|
||||
