|
|||||
WesBell Electronics sells different types of Power Cable that are either armored (with an aluminum interlocked armor) or not armored. These power cables are approved for underground use or as some call it, direct burial. This is the Type MV-105 35kv power cable with the AIA (Aluminum Interlocked Jacket). These power cables are approved for underground use or as some call it, direct burial. These cables have a lot of copper in them which make it difficult to price on the internet. If you need a different type of power cable we also stock Welding Cable, locomotive cable, Electrical Wire and Tray Cable. Please call for a quote if you don‘t see any pricing. We also offer FREE SHIPPING over $250.00. Call now (800) 334-8400!
Not sure what type of power cable you need? See our Power Cable Questions and Answers. There's also a discussion on the different types of power cable and their applications.
Products
- Hook Up Wire
- Kynar Wire Wrap
- Military (MIL SPEC Wires)
- Teflon (High Temperature Wire)
- Bare or Tinned Copper - Solid Core Wire
- Electrical Wire (THHN / THWN)
- Romex®
- Portable Cord (SOOW, SJOOW)
- Multi-conductor Cables
- Power / Industrial Cables
- Heat Shrink Tubing
- Welding Cable
- Extra Flexible Welding Cable - Orange
- Extension Cords
- Speaker Wire
Duralox EPR/AIA/PVC, Power, Shielded, Armored 35kV, UL Type MV-105 or MC, 100% Ins. Level, 345 Mils, Three Conductor
Product Construction:
Conductors:
- 1/0 Awg through 1000 MCM bare copper
- Compact Class B strand
Extruded Strand Shield (ESS):
- Thermoset semi-conducting stress control layer over conductor
Insulation:
- Ethylene Propylene Rubber (EPR) colored to contrast with black conducting shield layer
Extruded Insulation Shield (EIS):
- Thermoset semi-conducting polymeric layer free stripping from insulation
Shield:
- 5mil annealed copper tape with a minimum 25% overlap
Ground:
- Annealed bare copper Class B stranding per ASTM B8
Armor:
- Aluminum Interlocked Armor (AIA)
Jacket:
- Flame retardant, moisture and sunlight resistant PVC
Applications:
- Ideally suited for use in broad range of commercial, industrial and utility applications where reliability is the major concern, maximum performance will be demanded, space is limited, ease of installation is critical and fire resistance is necessary
- # Installed in wet and dry locations, indoors or outdoors and in exposed or concealed work
- May be used in cable trays or on approved supports in protected areas
Features:
- Rated 105°C wet or dry
- Excellent heat and moisture resistance
- Outstanding corona resistance
- Flexibility for easy handling
- High dielectric strength
- Low moisture absorption
- Electrical stability under stress
- Chemical and radiation resistant
- Excellent crush resistance
- Flame and sunlight resistant
- Cost-effective alternative to installations in conduit
- Meets cold bend test at -25°C
on the items below.
| Part Number | # of Conductors | Awg Size | Ground Awg Size | Nominal OD | Weight per 1000 feet |
| 17480.535100 | 3 | 1/0 | 4 | 3.01 | 4216 |
| 17480.535200 | 3 | 2/0 | 4 | 3.09 | 4668 |
| 17480.535400 | 3 | 4/0 | 3 | 3.31 | 5908 |
| 17480.536000 | 3 | 250 mcm | 3 | 3.48 | 6437 |
| 17480.536200 | 3 | 350 mcm | 2 | 3.69 | 7608 |
| 17480.536500 | 3 | 500 mcm | 1 | 3.94 | 9781 |
| 17480.537000 | 3 | 750 mcm | 1/0 | 4.40 | 12781 |
|
||||
