|
|||||
WesBell Electronics stocks Heat Shrink Tubing as an added accessory to its wire and cable products. This is the 2:1 Polyolefin with adhesive. It has an adhesive glue on the inside that melts when heated so it has a better hold on the wire. If you don't need the adhesive line, try our standard 2:1 Polyolefin without adhesive. Please call with any questions regarding our Heat Shrink tubing. It comes on spools or in 4 foot lengths. Some are listed below, but if you can‘t find the specific cord you need please call to get a quote. WesBell also offers FREE SHIPPING over $250.00. Call now (800) 334-8400 or buy online through our shopping cart!
Products
- Hook Up Wire
- Kynar Wire Wrap
- Military (MIL SPEC Wires)
- Teflon (High Temperature Wire)
- Bare or Tinned Copper - Solid Core Wire
- Electrical Wire (THHN - Building Wire)
- Romex®
- Portable Cord (SOOW, SJOOW)
- Multi-conductor Cables
- Power / Industrial Cables
- Heat Shrink Tubing
- Welding Cable
- Extra Flexible Welding Cable - Orange
- Extension Cords
- Speaker Wire
Flexible Irradiated Polyolefin Heat Shrink Tubing with Adhesive
Description:
- Flame retardant, flexible Polyolefin heat shrink tubing lined with a moisture proof sealant. For use in repairing and protecting cable jackets, outdoor connections and splices. Upon shrinking, the inner adhesive melts and flows while outer tubing shrinks to conform to substrate. Ideal for strain relief, sealing, encapsulating, moisture and corrosion protection of wires and termials.
Properties:
- Shrink Ratio - 2:1 (50%)
- Longitudinal Shrinkage - 5% max
- Operating Temp. range - (-55°C to +110°C>)
- Dielectric Strength - 800V/mil
- UL Rating - 600 Volts at 125°C
- Specific Gravity - 1.2 (max)
- Tensile Strength - 2,100 psi
- Ultimate Elongation - 200%
- Water Absorbtion - .3% (min)
Features:
- Moisture Protection
- Flexible
- Creates corrosion resistant seal
- For use on electrical connections, splices and breakouts
- For sealing CATV subscriber drop line connections
- cuts easily
- Supplied in ONLY 4 ft lengths
| Part Number | Size (measured by Inner Diameter in inches) |
Recovered Wall Thickness in inches |
| Heat Shrink Tubing Adhesive 1/8 | 1/8 | .027 |
| Heat Shink Tubing Adhesive 3/16 | 3/16 | .027 |
| Heat Shrink Tubing Adhesive 1/4 | 1/4 | .030 |
| Heat Shrink Tubing Adhesive 3/8 | 3/8 | .031 |
| Heat Shrink Tubing Adhesive 1/2 | 1/2 | .032 |
| Heat Shrink Tubing Adhesive 3/4 | 3/4 | .037 |
| Heat Shrink Tubing Adhesive 1 | 1 | .046 |
| Heat Shrink Tubing Adhesive 1 1/2 | 1 1/2 | .049 |
|
||||
